3 Tips to make your garage door repair better

Tips to make your garage door repair better

Garage doors are vital for provision of security to your properties like cars and as such there is need to ensure they function properly and are able to perform its protection function diligently. Occasionally, constant open and closure of garage doors can lead to damages making the door either too weak that it opens easily or even completely refuses to operate. Certain problems can be easily managed and addressed without seeking the services of a professional technician like Garage Door Repair San Jose who have solutions to even the biggest door issues. But to start it and to repair garage doors by yourself, these tips can be quite helpful.

1. Observe of metal track

Garage door whether it rolls up during opening or swing open operate on spring tension and thus moves on metal tracks on the walls. This usually attracts attention during the door repair as it is most likely to be the source of problem. Observation of metal tracks thus can enable you identify the problem and attend to it as required. Basically, mounting and alignment of the brackets might be loose or tight and thus you will tighten or loosen as required. Similarly, observe condition of the tracks to identify presence of dirt and hardened grease and clean appropriately with household cleaner.

2. Observe other hard wares

The cause of garage door malfunction might be due to another reason apart from metal tracks. Plates where the spring is mounted on swing-up door, hinges on roll-up doors and enlargement of screw hole are some of the hard wares that might warrant fixing. Presence of only one torsion spring on roll-up door will necessitate seeking help from a professional as you could be easily injured when fixing it.

3. Attend to garage door opener

The garage door opener can also be a cause of problem and warrant repair. And we have received many mails from readers in San Jose, CA, who confirm this. This exercise is usually handy but manageable, dirt, or loosening of one part of the opener might require repair but sometimes there might be need to remove and install a new opener and thus when installing the new opener, observing and following the previous installation can be helpful but when feeling incapable to repair and install the door opener as well as any part of the garage door, seek the help of a professional.

Garage Door Opener Troubleshooting 101

Garage Door Opener Trouble Shooting

There are many reasons why your garage door wont open, close, or stop working properly. One of the certain reasons is the garage door opener, maybe it has reached the end of its design life. But if you bought the garage door opener just recently, then that’s a different issue after all. It can be because of some simple issues. However you don’t have to panic since it can be fixed and this garage door opener repair Sacramento 101 will provide you with the necessary information you need.

Some of the garage door opener problems

First and foremost lets review some of the problems that you can incur with your garage door opener. The garage door may not open or close; it may reverse just immediately after touching the floor or before touching the floor in case of a up and over garage doors; may not respond to the remote or the wall switch; the garage door opener motor continuously runs even after opening or closing the garage door; and many other small issues.

How to fix the problems

This is the most important part of this garage door opener troubleshooting 101. Why? It provides the step to step and clear solutions to your garage door opener related problems. In attempt to describe the troubleshooting tips, the problems will be categorized as shown below.

1. Garage door opener does not respond to the remote and the wall switch

First check if the opener has power to rule out electrical issues such as circuit breaker, or the fuse. If all the above is okay, there are other possible reasons for this. Now try the following tips: reprogram the remote or check the batteries, and possibly if you are in range; check the antenna on the motor unit for blocked sensors, the sensors should hang down directly across each other.

2. Garage door wont open or close

Check your limit switch, loosen it using a screw driver either and test. Many people in Sacramento CA have reported that just this did the trick for them.

3. Garage door reverses before hitting the floor or immediately after touching the floor

Adjust the close limit switch and adjust the hitting of floor and reversing problem, and adjust the close force limit switch to solve for reversing before hitting the floor.

4. Garage door doesn’t open or close completely

This problem is the same as the above problem (No.3). Adjust the close limits as well.

5. Garage door motor cant stop running

Again this is another problem with the limit switch. Adjust the limit switch either on the rear of door opener, or on the track, or move the limit switch away from the motor.

Finally, your garage door system will have these general problems of running motors producing squeaking noises, remote issues, and problems with opening and closing the garage door. There is no reason to start tearing the mechanical pieces that are more advanced in order to fix it yourself.

So no matter if you live in Sacramento or any other city – after following the solutions offered by this garage door opener troubleshooting 101 article, and the symptoms persist, then depending on the state of your door i.e old or new, then you should consider replacing the garage door opener system.

Manual vs Automatic Garage Doors

Manual or Automatic Garage Doors

Whether to put up a manual or an automatic garage door is a question that that all garage owners have to ask themselves. The sheer fact that garage doors come in various shapes and sizes makes it paramount to decide whether to automate the door or just put up a manual one. This decision can easily be done by simply considering the pros and cons of each type of door and weighing whether the pros outweigh the cons for each type of door. The idea for this post came after some of the readers have been asking for tips on garage door replacement in Reno, NV. In this battle of Manual vs Automatic garage doors, the garage owner has to look at the various aspects of these doors and then decide by himself which type wins.

The installation of the door is one of the aspects that you as the garage owner has to consider. Manual garage doors are much easier to install than automatic doors. Automatic doors include installation of the mechanical parts that might be tricky and may require the intervention of an expert. Putting up a manual garage door is much easier and does not demand the help of an expert. A little help from a friend in terms of support since the garage door might be heavy is all that you need. Installing an automated door is also a bit expensive due the fact that you have to purchase the mechanical parts.

Convenience is another aspect that you have to consider when making the decision on what kind of door to install. An automatic garage door is convenient in the sense that you do not have to get out of the vehicle to open the door. All you need is to press a button on the remote control and the door slides right up. For a manual door, you have to get out of the vehicle and lift the door yourself. The little effort used to open an automatic one with a garage door opener is also another great convenience.

Safety is also a crucial factor when choosing the kind of garage door to install. An automatic door is safer than the manual door since it has detectors installed that prevent the door from closing if something is on its way. A manual door has no such detectors and may easily crush anything on its way down including a small child. I hope you enjoyed this post and whether you live in Reno or somewhere else, you should now find it easier to replace your garage door without problems.